KEMET T520X337M010ATE010 330 µF 10 V Polymer Tantalum Capacitor

SKU: T520X337M010ATE010
Category: , ,

The KEMET T520X337M010ATE010 is a 330 µF 10 V surface-mount polymer tantalum capacitor from the T520 KO-CAP series, in a molded case measuring 7.3 x 4.3 x 4 mm (EIA 2817, metric 7343) with a tin termination and a tantalum anode with a conductive polymer cathode. Replacing the manganese dioxide layer of a conventional solid tantalum with polymer gives a low ESR that stays low over temperature, a benign failure mode described by KEMET as non-combustible, and a +105 °C continuous rating that needs no voltage derating at the +85 °C point where MnO2 parts must already be derated.

Available on backorder

Request Price & Availability

Pricing, lead time and bulk discounts are quoted per order — send us your part numbers and quantities and we will reply within one business day.

Email us for a quote

Description

The KEMET T520X337M010ATE010 is a 330 µF 10 V surface-mount polymer tantalum capacitor from the T520 KO-CAP series, in a molded case measuring 7.3 x 4.3 x 4 mm (EIA 2817, metric 7343) with a tin termination and a tantalum anode with a conductive polymer cathode. Replacing the manganese dioxide layer of a conventional solid tantalum with polymer gives a low ESR that stays low over temperature, a benign failure mode described by KEMET as non-combustible, and a +105 °C continuous rating that needs no voltage derating at the +85 °C point where MnO2 parts must already be derated. The series is used for decoupling and bulk hold-up on processor, FPGA, memory and POL converter rails, and for filtering in industrial, telecom, instrumentation and portable equipment where board space and transient response both matter. Specified from -55/+105°C with a 2000 Hrs (105 °C) endurance rating, 10 mOhm ESR at 100 kHz (+25 °C), 5000 mA rms ripple current at 100 kHz (+45 °C) falling to 3500 mA at +85 °C and 1250 mA at +105 °C, 330 µA leakage current after 5 minutes (+25 °C) and 10% dissipation factor at 120 Hz. Parts are supplied on 178 mm tape and reel. As with all tantalum-anode parts, KEMET supports conflict-minerals (3TG) due diligence and a completed CMRT is available on request. Vexelora supplies the T520 KO-CAP series sourced to order; availability and lead time are confirmed with each quotation.

Datasheet

Review the complete technical specifications in the official manufacturer document: Download kemet t520x337m010ate010 specsheet (PDF, KEMET).

Specifications

Attributes Value
Brand

KEMET

Condition

New / Original

Lead Time

Confirmed per quotation

Warranty

12 months

Capacitance

330 µF

Capacitance Tolerance

±20%

Rated Voltage

10 VDC at +105 °C

Dielectric

Tantalum anode, conductive polymer cathode (KO-CAP)

ESR

10 mOhm at 100 kHz (+25 °C)

Ripple Current

5000 mA rms at 100 kHz (+45 °C) / 3500 mA (+85 °C) / 1250 mA (+105 °C)

Leakage Current

330 µA max after 5 min (+25 °C)

Dissipation Factor

10% at 120 Hz

Operating Temperature

-55/+105°C

Endurance

2000 Hrs (105 °C)

Case Size

2817 / 7343, 7.3 x 4.3 x 4 mm (L x W x H)

Termination

Tin-plated, SMD chip

Moisture Sensitivity Level

MSL 3

Packaging

Tape and reel, 178 mm (500 pcs)

Failure Mode

Non-combustible polymer cathode

Conflict Minerals

3TG due diligence supported; CMRT available on request

Series

T520 KO-CAP

Mounting

SMD