TXC OG Series OCXO 9.8 x 7.6 mm 10 – 54 MHz

SKU: TXC-OG-SERIES
Category: ,

10 to 54 MHz OCXO in 9.8 x 7.6 x 5.7 mm, +/-5 to +/-10 ppb over -40 to +85 C, 3.3 V LVCMOS, -164 dBc/Hz noise floor.

Available on backorder

Request Price & Availability

Pricing, lead time and bulk discounts are quoted per order — send us your part numbers and quantities and we will reply within one business day.

Email us for a quote

Description

The OG Series carries the same electrical grade as the full-size OE – 10 to 54 MHz, +/-5 to +/-10 ppb over -40 to +85 C, 3.3 V LVCMOS – in a 9.8 x 7.6 x 5.7 mm package. In practice that makes it the default choice for a new radio or line card design: the board area it consumes is close to a large TCXO, and the stability it delivers is two orders of magnitude tighter.

When the OG is the right compromise

An oven-controlled oscillator keeps a small heater around the quartz plate, holding the crystal at its turnover point so that ambient temperature stops being the dominant error term. The cost of that trick is warm-up time and steady-state current, both of which the OG datasheet quantifies: 3 minutes maximum warm-up at a 750 mA surge, then 200 mA at 25 C. If the product is mains or PoE powered and runs continuously, that steady 200 mA is the number to budget in the thermal design, not the surge.

Compared with the OE, the OG gives up package volume rather than specification. Compared with the 7.0 x 5.0 mm OH, it buys about one stability grade: the OG holds +/-5 to +/-10 ppb while the OH is quoted at +/-10 to +/-30 ppb. That step matters in Stratum 3E holdover and in SyncE chains where time error accumulates across a long holdover window.

Phase noise at 10 MHz

TXC quotes -86 dBc/Hz at 1 Hz offset, -119 dBc/Hz at 10 Hz, -140 dBc/Hz at 100 Hz, -157 dBc/Hz at 1 kHz, -162 dBc/Hz at 10 kHz, -163 dBc/Hz at 100 kHz and -164 dBc/Hz at 1 MHz. Reading the table at 10 Hz rather than at the floor tells you what the part does to close-in phase error in an LO chain; the -164 dBc/Hz floor is simply the noise of a well-designed CMOS output stage.

Options and ordering

Three options move the part away from the base specification: a +/-3 ppb stability grade, a 95 C upper operating temperature, and a 3.9 mm package height instead of 5.7 mm. An AFC input is also available for designs that discipline the oscillator to a recovered reference – 0 to 3.3 V control range, +/-3.6 to +/-5 ppm pulling, 1 to 3 percent linearity.

Because TXC builds the OG to the frequency the customer asks for, there is no fixed catalogue code to quote against. Vexelora supplies the series sourced to order: send the frequency, the stability grade you need and the target temperature range, and availability and lead time are confirmed with each quotation.

Grades published for this package

The series letter on these parts names a package, not a single stability class. TXC lists the same package in more than one grade, and the electrical table further down this page belongs to the grade whose datasheet is linked above. A part can therefore carry this series letter and still differ in stability, upper temperature and frequency span, so the grade is fixed together with the frequency when the order is placed.

Grade Stability vs temperature Operating temperature Frequency span
ThermSym +/-20 ppb -40 to +85 C 10 – 50 MHz
Reliable (Hercules) +/-10 ppb -40 to +105 C 10 – 54 MHz
High stability (Chronos) +/-5 ppb -40 to +85 C 10 – 54 MHz

If the target design sits between two rows, send the frequency and the temperature range it has to survive to leon@vexelora.com and the grade will be quoted against that requirement.

Specification summary

Output frequency 10 – 54 MHz
Stability vs temperature +/-5 ppb min, +/-10 ppb max (+/-3 ppb on request)
Supply voltage 3.3 V +/-5%
Current, warm-up / steady state 750 mA max / 200 mA at 25 C
Warm-up time 3 min max
Aging, per day +/-1 ppb
Aging, first year +/-0.3 ppm
Aging, 10 years +/-1.5 ppm
All-causes stability, 10 years +/-4.6 ppm
Operating temperature -40 to +85 C (95 C on request)
Package 9.8 x 7.6 x 5.7 mm (3.9 mm height on request)
Phase noise at 10 MHz, 10 Hz offset -119 dBc/Hz
AFC pulling range (option) +/-3.6 to +/-5 ppm

Typical applications

  • Stratum 3E synchronisation
  • Base station DU and CU
  • AAU, 5G RRH and small cell
  • Phase holdover

Related TXC timing products

Send the frequency, stability grade and target temperature range to leon@vexelora.com for a quotation.

Specifications

Attributes Value
Brand

TXC

Condition

New / Original

Packaging

Standard export carton

Lead Time

Availability and lead time confirmed with each quotation

Warranty

12 months

Series

OG (ThermSym, high stability)

Output Frequency

10 – 54 MHz

Frequency Stability vs Temperature

+/-5 ppb min, +/-10 ppb max (+/-3 ppb on request)

Supply Voltage

3.3 V +/-5%

Output Type

LVCMOS

Operating Temperature

-40 to +85 C (95 C on request)

Package

9.8 x 7.6 x 5.7 mm SMD, 6 pad (3.9 mm height on request)

Warm-up Time

3 min max

Current Consumption

750 mA max warm-up, 200 mA steady state at 25 C

Aging

+/-1 ppb/day, +/-0.3 ppm first year, +/-1.5 ppm 10 years

Phase Noise (10 MHz)

-86 dBc/Hz @1 Hz, -119 @10 Hz, -140 @100 Hz, -157 @1 kHz, -162 @10 kHz, -164 @1 MHz