TXC OK Series OCXO 5.5 x 3.7 mm 10 – 50 MHz
10 to 50 MHz OCXO in 5.5 x 3.7 x 2.5 mm, +/-20 to +/-50 ppb over -40 to +85 C, 3.3 V LVCMOS, for IEEE 1588 and SyncE nodes.
Request Price & Availability
Pricing, lead time and bulk discounts are quoted per order — send us your part numbers and quantities and we will reply within one business day.
Email us for a quoteDescription
The OK Series is the smallest oven-controlled oscillator TXC lists: 5.5 x 3.7 x 2.5 mm, 10 to 50 MHz, +/-20 to +/-50 ppb over -40 to +85 C on 3.3 V. It exists because synchronisation requirements have moved down-market – a small cell or an optical network unit now has to meet a time-error budget that used to apply only to a central office card, and there is no room on those boards for a 14 x 9 mm can.
What an oven buys at this size
A TCXO compensates temperature with a correction network; an OCXO removes the temperature error at source by holding the quartz plate at its turnover point. The OK keeps that principle inside a package that is barely larger than a 5.0 x 3.2 mm TCXO, which is the whole point of the part. Stability improves from the +/-0.1 to +/-0.28 ppm of a precise TCXO to +/-20 to +/-50 ppb, a factor of roughly five to ten depending on the temperature window being compared.
The costs are the ones every oven carries: 3 minutes maximum warm-up, a 750 mA surge during heat-up, 200 mA steady state at 25 C, and a heater that has to be given room in the thermal design. Ageing is quoted at +/-3 ppb typical and +/-5 ppb maximum per day, +/-1.5 ppm in the first year and +/-3 ppm over ten years, with an all-causes figure of +/-4.6 ppm across ten years.
Design checks before specifying the OK
Three things decide whether the OK is the right part. First, thermal: a 200 mA heater inside a sealed enclosure raises the local ambient, so the surrounding components and the board cut-out both need review. Second, holdover budget: the all-causes figure is quoted for ten years of operating conditions, which is the number to use when calculating time error after a reference loss rather than the +/-20 ppb headline. Third, frequency: the family covers 10 to 50 MHz, so a 54 MHz design has to step up to the OH, OG or OE.
Options and how the part is supplied
An AFC input is available for designs that discipline the oscillator to a recovered reference, with a 0 to 3.3 V control range, +/-3.6 to +/-5 ppm pulling and 1 to 3 percent linearity. A 95 C upper operating temperature is available on request, and frequency is set per order anywhere in the 10 to 50 MHz band.
Vexelora supplies the OK Series sourced to order. Because the orderable code is built from the frequency and options rather than taken from a fixed catalogue list, the quotation is where frequency, temperature grade and lead time are fixed – availability and lead time are confirmed with each quotation.
Grades published for this package
The series letter on these parts names a package, not a single stability class. TXC lists the same package in more than one grade, and the electrical table further down this page belongs to the grade whose datasheet is linked above. A part can therefore carry this series letter and still differ in stability, upper temperature and frequency span, so the grade is fixed together with the frequency when the order is placed.
| Grade | Stability vs temperature | Operating temperature | Frequency span |
|---|---|---|---|
| Miniature (Eros) | +/-20 ppb | -40 to +85 C | 10 – 50 MHz |
If the target design sits between two rows, send the frequency and the temperature range it has to survive to leon@vexelora.com and the grade will be quoted against that requirement.
Specification summary
| Output frequency | 10 – 50 MHz |
|---|---|
| Stability vs temperature | +/-20 ppb min, +/-50 ppb max |
| Supply voltage | 3.3 V +/-5% |
| Current, warm-up / steady state | 750 mA max / 200 mA at 25 C |
| Warm-up time | 3 min max |
| Aging, per day | +/-3 ppb typ, +/-5 ppb max |
| Aging, first year | +/-1.5 ppm |
| Aging, 10 years | +/-3 ppm |
| All-causes stability, 10 years | +/-4.6 ppm |
| Frequency tolerance | +/-500 ppb |
| Operating temperature | -40 to +85 C (95 C on request) |
| Package | 5.5 x 3.7 x 2.5 mm, 10 pad |
| Frequency range advantage | Smaller than a 7.0 x 5.0 mm TCXO footprint |
Typical applications
- IEEE 1588 and SyncE synchronisation
- AAU, 5G RRH and small cell
- Optical network units
- Compact timing modules
Related TXC timing products
- TXC frequency control products at Vexelora
- TXC OH Series OCXO
- TXC OG Series OCXO
- TXC OE Series OCXO
- TXC 7C-25.000MBB-T 25 MHz CMOS clock oscillator
- TXC 7M-16.000MAAJ-T 16 MHz quartz crystal
Send the frequency, stability grade and target temperature range to leon@vexelora.com for a quotation.
Specifications
| Attributes | Value |
|---|---|
| Brand |
TXC |
| Condition |
New / Original |
| Packaging |
Standard export carton |
| Lead Time |
Availability and lead time confirmed with each quotation |
| Warranty |
12 months |
| Series |
OK (ThermSym, ultra miniature) |
| Output Frequency |
10 – 50 MHz |
| Frequency Stability vs Temperature |
+/-20 ppb min, +/-50 ppb max |
| Supply Voltage |
3.3 V +/-5% |
| Output Type |
LVCMOS |
| Operating Temperature |
-40 to +85 C (95 C on request) |
| Package |
5.5 x 3.7 x 2.5 mm SMD, 10 pad |
| Warm-up Time |
3 min max |
| Current Consumption |
750 mA max warm-up, 200 mA steady state at 25 C |
| Aging |
+/-3 ppb typ, +/-5 ppb max per day; +/-1.5 ppm first year; +/-3 ppm 10 years |





