TXC 7N Series TCXO 7.0 x 5.0 mm 10 – 52 MHz

SKU: TXC-7N-SERIES
Category: ,

10 to 52 MHz precise TCXO, +/-0.10 to +/-0.28 ppm depending on temperature band, clipped sine or CMOS, 2.5 to 3.3 V, 7.0 x 5.0 x 2.0 mm, 4 or 10 pad.

Available on backorder

Request Price & Availability

Pricing, lead time and bulk discounts are quoted per order — send us your part numbers and quantities and we will reply within one business day.

Email us for a quote

Description

The 7N is the 7.0 x 5.0 mm member of TXC’s Precise TCXO family, and it is the part to look at when a design needs better than an ordinary clock oscillator but cannot carry an oven-controlled part. It covers 10 to 52 MHz, runs from 2.5 to 3.3 V, and puts out either a clipped sinewave or a CMOS square wave from the same footprint.

Stability is quoted against three temperature bands

TXC does not publish a single stability figure for this family, because the specification changes with the band you design for. From -20 to +70 C the part holds +/-0.10 ppm; from -40 to +85 C it holds +/-0.14 ppm; from -40 to +105 C it holds +/-0.28 ppm. Load and supply variations each add +/-0.05 ppm, and the frequency tolerance after two reflow cycles is +/-2.0 ppm.

That structure matters when you are costing a design. Specifying the 105 C band on an indoor unit buys stability you will never use and pays for it twice: once in test time and once in the higher grade. The -40 to +85 C band covers most networking and industrial boards, and the wider band belongs outdoors or next to a power stage.

Output, load and current

The clipped sinewave output delivers at least 0.8 Vp-p into a 10 kohm load with 10 pF of capacitance and draws up to 5 mA. The CMOS option swings to 90 percent and 10 percent of Vcc into 15 pF with rise and fall times of 6 ns or less, at up to 10 mA. Duty cycle stays inside 40 to 60 percent in both cases, and start-up reaches 90 percent of final amplitude within 5 ms.

Choosing between the two is usually decided by the load, not by the oscillator: a clipped sinewave into a high impedance buffer keeps the harmonics down, while CMOS drives a clock input directly without extra components.

AFC and output enable

Both are options rather than standard. The AFC input pulls the output between +5 and +12 ppm at 2.5 V control voltage and between -5 and -12 ppm at 0.5 V, which is a trimming range for disciplining against a reference, not the wide pull of a VCXO. The output enable pin switches at 0.8 x Vcc and 0.2 x Vcc, and a floating pin is treated as enabled.

Holdover and free-run budgets

Aging is +/-1 ppm in the first year. Two optional figures are worth having in front of you when a customer asks what happens when the reference disappears: a 24 hour holdover stability of +/-0.32 ppm measured after 48 hours of operation, and a free-run accuracy of +/-4.6 ppm over 20 years that already includes calibration tolerance at 25 C, temperature, supply variation, load variation, reflow shift and long-term aging.

Package and pad count

The package is 7.0 x 5.0 x 2.0 mm. Four pads is enough for a plain CMOS part with no control pin; ten pads is the version to specify when AFC and output enable are both needed, or when the design has to stay pin-compatible with a board that already uses the larger option.

Reading the ordering code

The code carries the frequency plus a suffix that encodes output type, stability band and packaging, which is why two 7N parts of the same frequency can differ in grade. Ten frequencies have been confirmed in distribution so far and are listed below.

Verified ordering codes

The codes below were each checked against a live distribution listing and carry the frequency, package, CMOS output at 3.3 V and the catalogued +/-0.28 ppm stability figure. The suffix is not decoded here because it bundles output type, stability band and packaging; a frequency outside this list is quoted against the code that matches the band the design needs.

Part number Frequency Package
7N-10.000MBP-T 10.000 MHz SMD 7.0 x 5.0, 10 pad
7N-12.800MBP-T 12.800 MHz SMD 7.0 x 5.0, 10 pad
7N-19.200MBP-T 19.200 MHz SMD 7.0 x 5.0, 10 pad
7N-19.440MBP-T 19.440 MHz SMD 7.0 x 5.0, 10 pad
7N-20.000MBP-T 20.000 MHz SMD 7.0 x 5.0, 10 pad
7N-25.000MBP-T 25.000 MHz SMD 7.0 x 5.0, 10 pad
7N-26.000MBP-T 26.000 MHz SMD 7.0 x 5.0, 10 pad
7N-38.400MBP-T 38.400 MHz SMD 7.0 x 5.0, 10 pad
7N-38.880MBP-T 38.880 MHz SMD 7.0 x 5.0, 10 pad
7N-40.000MBP-T 40.000 MHz SMD 7.0 x 5.0, 10 pad

All 10 codes are sourced to order; availability and lead time are confirmed with each quotation. Send the frequency, the temperature band and the annual quantity to leon@vexelora.com.

Specification summary

Frequency range 10 – 52 MHz, fundamental
Stability, -20 to +70 C +/-0.10 ppm
Stability, -40 to +85 C +/-0.14 ppm
Stability, -40 to +105 C +/-0.28 ppm
Stability vs load, +/-5% +/-0.05 ppm
Stability vs supply, +/-5% +/-0.05 ppm
Frequency tolerance, after two reflows +/-2.0 ppm
Slope over temperature +/-50 ppb/C (-40 to +85 C), +/-100 ppb/C (-40 to +105 C)
Supply voltage 2.5 to 3.3 V +/-5% (2.8 V and 3.3 V typical)
Current, clipped sine / CMOS 5 mA / 10 mA max
Output, clipped sine 0.8 Vp-p min into 10 kohm // 10 pF
Output, CMOS 90% / 10% of Vcc into 15 pF, rise and fall 6 ns max
Duty cycle 40 to 60%
Start-up time 5 ms max to 90% of final amplitude
AFC pull range (option) +5 to +12 ppm at VC = 2.5 V, -5 to -12 ppm at VC = 0.5 V
Aging, first year +/-1 ppm
Holdover stability, 24 h (option) +/-0.32 ppm after 48 h operation
Free-run accuracy, 20 years +/-4.6 ppm including calibration, temperature, supply, load, reflow and aging
Package 7.0 x 5.0 x 2.0 mm, 4 or 10 pad

Typical applications

  • Small cell and base station timing
  • Network infrastructure: servers, switches, routers
  • Test and measurement front ends
  • Industrial boards that cannot carry an OCXO

Related TXC timing products

Send the frequency, output type and temperature band to leon@vexelora.com for a quotation.

Specifications

Attributes Value
Brand

TXC

Condition

New / Original

Packaging

Standard export carton

Lead Time

Availability and lead time confirmed with each quotation

Warranty

12 months

Series

7N (Precise TCXO)

Output Frequency

10 – 52 MHz

Frequency Stability vs Temperature

+/-0.10 ppm (-20 to +70 C), +/-0.14 ppm (-40 to +85 C), +/-0.28 ppm (-40 to +105 C)

Supply Voltage

2.5 to 3.3 V +/-5% (2.8 V / 3.3 V typical)

Output Type

Clipped sinewave or CMOS

Operating Temperature

-40 to +105 C maximum range, see stability bands

Package

7.0 x 5.0 x 2.0 mm, 4 pad or 10 pad

Current Consumption

5 mA max clipped sine, 10 mA max CMOS

AFC

Option, +5 to +12 ppm at VC = 2.5 V, -5 to -12 ppm at VC = 0.5 V

Aging

+/-1 ppm first year

Start-up Time

5 ms max