TXC 7N-38.400MBP-T TCXO 38.4 MHz CMOS 3.3 V 7.0 x 5.0 mm

SKU: 7N-38.400MBP-T
Category: ,

TXC 7N-38.400MBP-T, 38.4 MHz CMOS precise TCXO in the 7.0 x 5.0 x 2.0 mm ten-pad package, 2.5 to 3.3 V, catalogued at +/-0.28 ppm. Sourced to order.

Available on backorder

Request Price & Availability

Pricing, lead time and bulk discounts are quoted per order — send us your part numbers and quantities and we will reply within one business day.

Email us for a quote

Description

7N-38.400MBP-T is a 38.400 MHz CMOS oscillator in the 7.0 x 5.0 x 2.0 mm ten-pad 7N package, running from 2.5 to 3.3 V and catalogued at +/-0.28 ppm. The frequency is confirmed against a live distribution listing, so the code is a fixed order rather than a configuration item.

The 38.4 MHz position in a cellular design

38.4 MHz is twice 19.2 MHz and four times 9.6 MHz, and that doubling chain is why it dominates LTE-era reference plans: the same clock can feed a modem’s reference input, a USB block that wants 19.2 MHz, and a baseband that divides by four. For an LTE-M or NB-IoT module the reference is usually the only clock on the board that has to hold over a temperature range, so the TCXO’s band specification ends up in the radio conformance report rather than only in the datasheet.

The tolerance budget is set by the standard, not by the oscillator alone. A +/-0.28 ppm part uses a fraction of a typical +/-5 ppm wide-area budget, which leaves the rest for ageing and for the reflow shift of +/-2.0 ppm that has to be measured out after assembly. First-year aging of +/-1 ppm is the number that decides whether a module still passes after a year in the field.

Which band the code actually covers

TXC publishes three stability rows on one electrical table: +/-0.10 ppm from -20 to +70 C, +/-0.14 ppm from -40 to +85 C and +/-0.28 ppm from -40 to +105 C. The catalogued figure for this part is the 105 C column, while the part is catalogued for operation over -40 to +85 C. In practice that means the specification you get is at least as tight as the label, and the exact band is fixed with the code when the order is placed.

Load and supply each contribute +/-0.05 ppm at +/-5%, which is small but not zero: a regulator that swings five percent under load transient will move the clock by 50 ppb, and that has to be inside the budget before the oscillator’s own figure is spent.

Output, start-up and control

The CMOS output drives 15 pF at 90 and 10 percent of Vcc with 6 ns edges and draws up to 10 mA. Start-up is 5 ms to 90 percent of final amplitude, and duty cycle stays inside 40 to 60 percent. The ten-pad body carries the optional AFC input, which pulls +5 to +12 ppm at 2.5 V and -5 to -12 ppm at 0.5 V, and an output enable that switches at 0.8 and 0.2 times Vcc.

Comparing it with the smaller package

The same 38.400 MHz frequency is also catalogued in the 7P package at 5.0 x 3.2 x 1.8 mm with six pads and the same electrical table. The choice is mechanical before it is electrical: 7N leaves room for the bypass capacitor and for a clean AFC trace, while 7P is what fits when the radio, the PA and the shield can have already taken the board area. Both are sourced to order.

Ordering this code

Quoting 7N-38.400MBP-T fixes 38.4 MHz, CMOS, ten pads and the catalogued stability. A different frequency inside the 10 to 52 MHz range, a clipped sinewave output or the tighter band moves the order to another 7N code. Parts are sourced to order; availability and lead time are confirmed with each quotation. Requirements go to leon@vexelora.com.

Specification summary

Nominal frequency 38.400 MHz
Series / package 7N, 7.0 x 5.0 x 2.0 mm, 10 pad SMD
Output type CMOS
Supply voltage 2.5 to 3.3 V +/-5%
Current consumption 10 mA max, CMOS output
Operating temperature -40 to +85 C
Frequency stability, -20 to +70 C +/-0.10 ppm
Frequency stability, -40 to +85 C +/-0.14 ppm
Frequency stability, -40 to +105 C +/-0.28 ppm
Stability vs load, +/-5% +/-0.05 ppm
Stability vs supply, +/-5% +/-0.05 ppm
Frequency tolerance, after two reflows +/-2.0 ppm
Aging, first year +/-1 ppm
Start-up time 5 ms max to 90% of final amplitude
Duty cycle 40 to 60%
Output swing, CMOS 90% / 10% of Vcc into 15 pF, rise and fall 6 ns max
AFC pull range (option) +5 to +12 ppm at VC = 2.5 V, -5 to -12 ppm at VC = 0.5 V

Typical applications

  • LTE and LTE-M modem reference
  • NB-IoT module clock
  • Small cell and CPE radio
  • Industrial wireless gateways

Related TXC timing parts

Send the frequency, temperature band and annual quantity to leon@vexelora.com for a quotation. Availability and lead time are confirmed with each quotation.

Datasheet

Full electrical tables and package drawings are in the official manufacturer datasheet: Download the TXC 7N-38.400MBP-T datasheet (PDF).

Specifications

Attributes Value
Brand

TXC

Condition

New / Original

Packaging

Standard export carton

Lead Time

Availability and lead time confirmed with each quotation

Warranty

12 months

Series

7N

Nominal frequency

38.400 MHz

Package

7N, 7.0 x 5.0 x 2.0 mm, 10 pad SMD

Output type

CMOS

Supply voltage

2.5 to 3.3 V

Frequency stability

+/-0.28 ppm (catalogued); +/-0.10 / 0.14 / 0.28 ppm by band

Operating temperature

-40 to +85 C