TXC 7P-38.400MBP-T TCXO 38.4 MHz CMOS 3.3 V 5.0 x 3.2 mm

SKU: 7P-38.400MBP-T
Category: ,

TXC 7P-38.400MBP-T, 38.4 MHz CMOS precise TCXO in the 5.0 x 3.2 x 1.8 mm six-pad package, 2.5 to 3.3 V, catalogued at +/-0.28 ppm. Sourced to order.

Available on backorder

Request Price & Availability

Pricing, lead time and bulk discounts are quoted per order — send us your part numbers and quantities and we will reply within one business day.

Email us for a quote

Description

7P-38.400MBP-T is the small-package version of the 38.4 MHz reference: 5.0 x 3.2 x 1.8 mm, six pads, CMOS output, 2.5 to 3.3 V supply, catalogued at +/-0.28 ppm. It carries the same electrical table as the larger 7N part and takes roughly half the board area.

The frequency the module needs

38.4 MHz is the reference that a large share of LTE-M and NB-IoT basebands expect, because it doubles cleanly to 76.8 MHz and divides to 19.2 MHz and 9.6 MHz, which covers the converter and USB rates used inside the same module. In a module the reference is one of the few components that cannot be integrated into the baseband, so its package size and its stability both end up on the mechanical and the radio conformance drawings.

The stability budget for a cellular IoT module is usually written as a few ppm over life, which sounds generous until the individual terms are added: temperature, ageing, reflow shift, load and supply. A part that holds a few tenths of a ppm across temperature spends very little of that budget, leaving room for the +/-2.0 ppm reflow shift that has to be measured out after assembly and the +/-1 ppm first-year ageing.

Reading the stability label correctly

TXC specifies three bands on one table: +/-0.10 ppm from -20 to +70 C, +/-0.14 ppm from -40 to +85 C and +/-0.28 ppm from -40 to +105 C. This code is catalogued at +/-0.28 ppm and catalogued for -40 to +85 C operation, which means the label carries the worst-case column rather than the figure that applies to the band the part is ordered for. Load and supply each add +/-0.05 ppm at +/-5%.

Six pads, 1.8 mm tall

The six-pad body carries supply, ground, output and the enabled control pin; the ten-pad version of the same footprint adds AFC and output enable. At 5.0 x 3.2 x 1.8 mm the part drops under a shield can without a cut-out, and the bypass capacitor has to be placed against the supply pad rather than at the edge of the keep-out. The ground pad under the body should go to a quiet plane; on a module with a PA nearby, tying it to the digital return is the usual way to import burst noise into the clock.

The CMOS output drives 15 pF at 90 and 10 percent of Vcc with 6 ns edges and draws up to 10 mA. Duty cycle is 40 to 60 percent and start-up reaches 90 percent of final amplitude inside 5 ms, which matters for a battery device that powers the radio in short windows.

Choosing between 7P and 7N at this frequency

Both packages are catalogued at 38.400 MHz with the same electrical table. The 7N at 7.0 x 5.0 x 2.0 mm leaves more room around the pads, which helps when an AFC trace has to run to a DAC; the 7P at 5.0 x 3.2 x 1.8 mm is what fits next to a transceiver in a module. Neither is a performance downgrade: the difference is mechanical and thermal, since a smaller body has less thermal mass and reaches its final temperature faster after a cold start.

Ordering this code

Quoting 7P-38.400MBP-T fixes 38.4 MHz, CMOS, six pads and the catalogued stability. A different frequency inside 10 to 52 MHz, the ten-pad option, or a tighter band moves the order to another 7P code. Parts are sourced to order; availability and lead time are confirmed with each quotation. Send the module constraints and annual volume to leon@vexelora.com.

Specification summary

Nominal frequency 38.400 MHz
Series / package 7P, 5.0 x 3.2 x 1.8 mm, 6 pad SMD
Output type CMOS
Supply voltage 2.5 to 3.3 V +/-5%
Current consumption 10 mA max, CMOS output
Operating temperature -40 to +85 C
Frequency stability, -20 to +70 C +/-0.10 ppm
Frequency stability, -40 to +85 C +/-0.14 ppm
Frequency stability, -40 to +105 C +/-0.28 ppm
Stability vs load, +/-5% +/-0.05 ppm
Stability vs supply, +/-5% +/-0.05 ppm
Frequency tolerance, after two reflows +/-2.0 ppm
Aging, first year +/-1 ppm
Start-up time 5 ms max to 90% of final amplitude
Duty cycle 40 to 60%
Output swing, CMOS 90% / 10% of Vcc into 15 pF, rise and fall 6 ns max

Typical applications

  • LTE-M and NB-IoT modules
  • Cellular IoT trackers and meters
  • Wearable and handheld radios
  • Compact wireless gateways

Related TXC timing parts

Send the frequency, temperature band and annual quantity to leon@vexelora.com for a quotation. Availability and lead time are confirmed with each quotation.

Datasheet

Full electrical tables and package drawings are in the official manufacturer datasheet: Download the TXC 7P-38.400MBP-T datasheet (PDF).

Specifications

Attributes Value
Brand

TXC

Condition

New / Original

Packaging

Standard export carton

Lead Time

Availability and lead time confirmed with each quotation

Warranty

12 months

Series

7P

Nominal frequency

38.400 MHz

Package

7P, 5.0 x 3.2 x 1.8 mm, 6 pad SMD

Output type

CMOS

Supply voltage

2.5 to 3.3 V

Frequency stability

+/-0.28 ppm (catalogued); +/-0.10 / 0.14 / 0.28 ppm by band

Operating temperature

-40 to +85 C