TXC OH Series OCXO 7.0 x 5.0 mm 10 – 54 MHz

SKU: TXC-OH-SERIES
Category: ,

10 to 54 MHz OCXO in 7.0 x 5.0 x 3.3 mm, +/-10 to +/-30 ppb over -40 to +95 C, 3.3 V LVCMOS, 1 minute warm-up.

Available on backorder

Request Price & Availability

Pricing, lead time and bulk discounts are quoted per order — send us your part numbers and quantities and we will reply within one business day.

Email us for a quote

Description

The OH Series is the 7.0 x 5.0 x 3.3 mm member of TXC’s ThermSym OCXO family, quoted at +/-10 to +/-30 ppb across -40 to +95 C with a 105 C option. It sits between the 9.8 x 7.6 mm OG and the 5.5 x 3.7 mm OK, and the interesting part of its datasheet is not the stability figure but the 1 minute warm-up.

A faster oven in a smaller package

Reducing the heated mass is what allows the OH to reach its specified stability in 1 minute rather than the 3 minutes quoted for the OE and OG. The warm-up surge is unchanged at 750 mA and steady-state current is the same 200 mA at 25 C, so the smaller package buys time-to-lockout rather than power. For equipment that is cycled – remote radio units on intermittent power, field instruments, transportable test gear – that difference is worth more than one stability grade.

The trade is ageing and close-in noise. The OH is quoted at +/-3 ppb typical and +/-5 ppb maximum per day, +/-1.5 ppm in the first year and +/-3 ppm over ten years, against +/-1 ppb per day and +/-1.5 ppm over ten years for the OG. Phase noise at 10 MHz starts at -84 dBc/Hz at 1 Hz and -114 dBc/Hz at 10 Hz, roughly 5 dB above the OG at the same offsets.

Applications the datasheet names

TXC lists 5G Advanced RRU, synchronisation to IEEE 1588 and SyncE, AAU and 5G RRH and small cell, and microwave transmission systems. The common thread is a design that has to meet a synchronisation standard at the box level, not at the chip level: the OCXO is what keeps the box compliant when the upstream reference disappears.

Options to settle before quoting

Four choices change what gets built: a 105 C upper operating temperature instead of 95 C, an AFC input for disciplining to an external reference (0 to 3.3 V control, +/-3.6 to +/-5 ppm pulling, 1 to 3 percent linearity), the pad configuration for your footprint, and of course the output frequency anywhere in 10 to 54 MHz.

Vexelora supplies the OH Series sourced to order, configured to the frequency and temperature grade the design needs; availability and lead time are confirmed with each quotation rather than promised from a stock position.

Grades published for this package

The series letter on these parts names a package, not a single stability class. TXC lists the same package in more than one grade, and the electrical table further down this page belongs to the grade whose datasheet is linked above. A part can therefore carry this series letter and still differ in stability, upper temperature and frequency span, so the grade is fixed together with the frequency when the order is placed.

Grade Stability vs temperature Operating temperature Frequency span
Miniature (Eros) +/-20 ppb -40 to +85 C 10 – 50 MHz
Reliable (Hercules) +/-10 ppb -40 to +105 C 10 – 54 MHz

If the target design sits between two rows, send the frequency and the temperature range it has to survive to leon@vexelora.com and the grade will be quoted against that requirement.

Specification summary

Output frequency 10 – 54 MHz
Stability vs temperature +/-10 ppb min, +/-30 ppb max
Supply voltage 3.3 V +/-5%
Current, warm-up / steady state 750 mA max / 200 mA at 25 C
Warm-up time 1 min max
Aging, per day +/-3 ppb typ, +/-5 ppb max
Aging, first year +/-1.5 ppm
Aging, 10 years +/-3 ppm
All-causes stability, 10 years +/-4.6 ppm
Operating temperature -40 to +95 C (105 C on request)
Package 7.0 x 5.0 x 3.3 mm, 10 pad
Phase noise at 10 MHz, 100 Hz offset -138 dBc/Hz
AFC pulling range (option) +/-3.6 to +/-5 ppm

Typical applications

  • 5G Advanced RRU
  • IEEE 1588 and SyncE synchronisation
  • AAU, 5G RRH and small cell
  • Microwave transmission systems

Related TXC timing products

Send the frequency, stability grade and target temperature range to leon@vexelora.com for a quotation.

Specifications

Attributes Value
Brand

TXC

Condition

New / Original

Packaging

Standard export carton

Lead Time

Availability and lead time confirmed with each quotation

Warranty

12 months

Series

OH (ThermSym, reliable)

Output Frequency

10 – 54 MHz

Frequency Stability vs Temperature

+/-10 ppb min, +/-30 ppb max

Supply Voltage

3.3 V +/-5%

Output Type

LVCMOS

Operating Temperature

-40 to +95 C (105 C on request)

Package

7.0 x 5.0 x 3.3 mm SMD, 10 pad

Warm-up Time

1 min max

Current Consumption

750 mA max warm-up, 200 mA steady state at 25 C

Aging

+/-3 ppb typ, +/-5 ppb max per day; +/-1.5 ppm first year; +/-3 ppm 10 years

Phase Noise (10 MHz)

-84 dBc/Hz @1 Hz, -114 @10 Hz, -138 @100 Hz, -155 @1 kHz, -162 @10 kHz, -164 @1 MHz